節能新型船舶鋼結構制造操作架專機配套焊接系統

基本配置包括:新型主變電源,送絲機頭,控制器

• 選用新型IGBT逆變電路，采用進口西門子模塊，比傳統SCR變壓器電源節能30％以上
• 可靠性強，堅固耐用，行業內領先的林肯自動化專機變壓器設計，保證焊機穩定輸出，
• 100％暫載率，適合長時間大電流使用；
• 輸入穩定，焊接平穩，焊縫成形好；有過流、過壓、過熱、過載等保護電路；
• 變壓器，線路板等內部關鍵零件經過浸漆工藝，
• 確保有效防止焊接工況常見的水分，灰塵，金屬粉塵，鹽霧侵蝕。
• 可用于碳弧氣刨；超長的焊接電纜，適用于船舶制造長縫焊的自動焊接；
• 專機機頭可調結構緊湊，所有部件均可方便靈活地調節，滿足客戶實際現場調節的需要；
• 四輪驅動，運行平穩，可靠性好；可實現多種焊接方式；
• 合金鋼送絲輪，使用壽命長，生產效率高；
• 可焊接碳鋼、不銹鋼、銅及鋁合金等金屬材料。性能卓越，質量可靠。
  

  Advantage

  500 amp output connections provide enhanced arc characteristics for low amperage submerged arc and MIG welding procedures. Single range control for precise output control and easy operation. Standard analog ammeter and analog voltmeter. Use the mode switch to select the desired output characteristics for the process being used – CV Submerged Arc, CV Innershield , CC Submerged Arc. Power start/stop push button (NVR) switches with pilot light. Fuse protected 115V wire feeder auxiliary power with 1000 volt-amp capacity. Terminal strip and output studs for remote connections and cable. Low profile case allows installation of the DC-1000 under a workbench and for stacking up to 2 machines to conserve floor space. Removable side panels for easy access to internal parts. Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%. Electronic and thermostatic protection from current overload and excessive temperatures. Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion. Recessed front panel protects operating controls. Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards. 優點 具有簡單量程的輸出控制器能精確的控制輸出，并且方便操作 電源開關帶有指示燈。 保險絲保護115伏送絲機輔助電源，送絲機電源容量為1000伏安。 可移動側板方便進入內部元件。 ±10%的網路電壓補償能維持焊縫的一致性。 具有過熱保護和過電流保護的功能。 凹進的前面板能保護控制器。 一年保修期內提供維修。

  
  

  Physical Specifications